E: commercialteam@nectar.co.uk T: (+44) 1708 386555

Compac M140 Series

Technical DetailsShow all+

The Compac M140 is designed to handle 20 bags per minute per line of 50 kg bags. This equates to 60 metric tonnes (MT) per hour per line or 120 tonnes per hour per unit (2 lines per unit). This is dependent on the specific characteristics of the product.

Maximum bag height is 1100 mm

The fully electronic, double weighing system has been approved and certified for accuracy by The Dutch Weights and Measures Authority (N.M.I.), under licence number T-1356. The system can give accurate weights +/- 0.5% up to a capacity of 110kg.

During a typical bagging operation the Compac M140 bagging machine (running both lines) can be operated in a safe and efficient manner by the following personnel:

Supplying Bags
1 Person
Weighing (Bag Clamp)
2 Persons
Stitching
2 Persons
Total
5 Persons

The number of personnel required can vary depending on the specific bagging operation but the above guidelines are sufficient for the majority of operations.

The Compac M140 is designed for use with any free flowing, granular product up to a particle size of 25 mm. It is ideally suited to the handling of cereals (such as rice, wheat & maize), fertilizers, sugar, pulses & beans.

The Compac M140 Mobile Bagging Unit is a specially designed and constructed bagging unit housed in a standard size ISO 20ft steel container measuring 20’ x 8’ x 8’6” (lxwxh). The Compac M140 can be handled with approved container handling equipment.

The Compac M140 contains two side by side bagging lines. Each bagging line is designed to provide bagging of free flowing commodity with a density of 0.70 to 1.25 tonnes per cubic meter at a speed of up to 20 bags per minute per line for 50 kg bags. This equates to approximately 120 MT per hour per bagging machine.

Actual performance will depend on the type of product that is bagged, the speed at which the equipment is fed with product, the efficiency of the operators and how quickly the bagged cargo is taken away from the machine.

M140 1

Weighers

Two accurate, electronically controlled, Stainless Steel double nett weighers. Each of these is equipped with two Stainless Steel dosing and metering valves, two weighbunkers, one bird-beak type antenna operated bag-clamp, operator control buttons and pilot lamps.

M140 2

Control Box

One Stainless Steel control box housing the electronic components, i.e., control units, counters, safety devices and control panels.

M140 3

Control Panel

Control panel for individual bagging lines.

M140 4

Pneumatic

One compressor and air tank including maintenance free air drying system.

M140 5

Bag Stitchers

Two stitchers with a semi automatic control system. Yarn coil holders and pneumatic yarn cutting system included. Mounted on height adjustable Stainless Steel columns.

M140 6

Conveyors

Two Heavy Duty Stainless Steel belt conveyors (Sliderbed type). Each equipped with a maintenance free drum drive motor with an anti-slip layer. Adjustable bag guiding boards ensure proper movement of the filled bag.

M140 7

Doors

Four side doors and two front doors. In operational mode side doors increase the work area to a total of 16 sqm.

M140 8

Power Room

One separate compartment housing the compressor and control units. Also suitable for housing the optional generator set, or workshop facilities.

M140 9

Container

One container constructed of heavy gauge steel and coated with fertiliser resistant coating of 120 microns and an anti-slip floor with integrated grid sections for ventilation purposes during storage. One internal fluorescent lighting set and one external flood light enabling 24 hour operation. One integrated anti-slip ladder for easy roof access.